Polycom DOC2091A Water System User Manual


  Open as PDF
of 220
 
55Chapter 3 Global DirectoryGlobal Management System User’s Guide
Global Directory Conguration
Conguring the server for LDAP
1. From the Global Directory window, select the Conguration button. A pop up window will
appear.
2. Two tabs are labeled with ILS or LDAP. Select the LDAP tab.
3. Enter the following information:
Field header Description
Address Name or IP address of server
Port Use 0 to accept the default protocol
LOGIN Required*
PASSWORD Required*
4. Click on Update.
Deleting your conguration settings
If changes have been made to LDAP server, select the conguration button. Click on the LDAP
tab and then click on delete. The LDAP conguration entry will be deleted.
NOTE
The name and password entered for LDAP conguration must be for an account that has
permission to modify the schema on the LDAP server. Refer to the following page on how to
modify the schema.
 previous next