Polycom DOC2091A Water System User Manual


  Open as PDF
of 220
 
58Chapter 3 Global DirectoryGlobal Management System User’s Guide
Global Directory Conguration
Conguring the server for ILS
1. From the Global Directory window, select the Conguration button. A pop up window will
appear.
2. Two tabs are labeled with ILS or LDAP. Select the ILS tab.
3. Enter the following information:
Field Description
Address Name or IP address of server
Port Use 0 to accept the default protocol
If ILS is from Site Server 3.0, then its port is 389.
If ILS is from Windows 2000, the its port is 1002.
LOGIN Optional
PASSWORD Optional
4. Click on Update.
Deleting your conguration settings
If changes have been made to ILS server, select the conguration button. Click on the ILS tab
and then click on delete. The ILS conguration entry will be deleted.
 previous next