Filter
Top Products
CL-5
III. Unit Start-Up (cont)
RECORD CONFIGURATION SETTINGS
UNIT (Configuration Settings)
PRESS ESCAPE KEY TO DISPLAY ‘UNIT’. PRESS DOWN ARROW KEY TO DISPLAY ‘OPT1’.
PRESS ENTER KEY. RECORD CONFIGURATION INFORMATION BELOW:
OPTIONS1 (Options Configuration)
SUBMODE ITEM ITEM EXPANSION DISPLAY ENTRY
UNIT
UNIT CONFIGURATION
SIZE UNIT SIZE XXX
SZA.1 COMPRESSOR A1 SIZE XX
SZA.2 COMPRESSOR A2 SIZE XX
SZA.3 COMPRESSOR A3 SIZE XX
SZA.4 COMPRESSOR A4 SIZE XX
SZB.1 COMPRESSOR B1 SIZE XX
SZB.2 COMPRESSOR B2 SIZE XX
SZB.3 COMPRESSOR B3 SIZE XX
SZB.4 COMPRESSOR B4 SIZE XX
SH.SP SUPERHEAT SETPOINT XX.X F
FAN.S FAN STAGING SELECT X
EXV EXV MODULE INSTALLED YES/NO
A1.TY COMPRESSOR A1 DIGITAL? YES/NO
MAX.T MAXIMUM A1 UNLOAD TIME XX
SUBMODE ITEM ITEM EXPANSION DISPLAY ENTRY
OPT1
UNIT OPTIONS 1 HARDWARE
FLUD COOLER FLUID X
MLV.S MINIMUM LOAD VALVE SELECT YES/NO
D.G.EN DISCHARGE GAS TEMP ENABLE ENBL/DSBL
CSB.E CSB BOARDS ENABLE ENBL/DSBL
CPC COOLER PUMP CONTROL ON/OFF
PM1E COOLER PUMP 1 ENABLE YES/NO
PM2E COOLER PUMP 2 ENABLE YES/NO
PM.P.S COOLER PMP PERIODIC STRT YES/NO
PM.SL COOLER PUMP SELECT X
PM.DY COOLER PUMP SHUTDOWN DLY XX MIN
PM.DT PUMP CHANGEOVER HOURS XXXX HRS
ROT.P ROTATE COOLER PUMPS NOW YES/NO
EMM EMM MODULE INSTALLED YES/NO
CND.T CND HX TYP 0=RTPF 1=MCHX 0/1
MOPS EXV MOP SET POINT XX
APPR CONFIG APPROACH SETPOINT XX