Filter
Top Products
72
List of parameters classified by purpose of use
Related to
monitoring
Frequency meter calibration
Pr. 54, Pr. 55, Pr. 56,
calibration parameter C1
Display of monitor on operation panel or
parameter unit (FR-PU04)
Pr. 52, communication parameter n16
Display of speed, etc. Pr. 37, Pr. 52
Related to incorrect
operation prevention
Function write prevention Pr. 77
Reverse rotation prevention (Pr. 17), Pr. 78
Current detection Pr. 48 to Pr. 51, Pr. 64, Pr. 65
Motor stall prevention Pr. 21, Pr. 22, Pr. 23, Pr. 28
Others
Input terminal function assignment Pr. 60 to Pr. 63
Output terminal function assignment Pr. 64, Pr. 65
Increased cooling fan life Pr. 76
Motor protection from overheat Pr. 9, Pr. 71
Automatic restart operation at alarm stop Pr. 66 to Pr. 69
Setting of earth (ground) fault overcurrent
protection
Pr. 40
Inverter reset selection Pr. 75
Maintenance timer output Additional parameters H1, H2
Output phase failure protection selection Maintenance parameter H8
Purpose of Use
Parameter Numbers
Parameter numbers which must be set