Filter
Top Products
58
Function (Parameter) list
2.1 Function (Parameter) list
*1. The factory setting varies according to the inverter capacity.
<200V class>
0.4K to 3.7K: 6%, 5.5K, 7.5K: 4%, 11K, 15K : 3%
<400V class>
0.4K, 0.75K: 6%, 1.5K, 2.2K: 5%, 3.7K: 4%, 5.5K, 7.5K: 3%, 11K, 15K: 2%
*2. The factory setting varies according to the inverter capacity.
Pr. 7 - - - - - 7.5K or less: 5s, 11K or more: 15s
Pr. 8 - - - - - 7.5K or less: 10s, 11K or more: 30s
CAUTION
indicates that the setting can be changed during operation if Pr. 77 "parameter
write disable selection" has been set to "0" (factory setting). (Note that the Pr. 53, Pr.
70 and Pr. 72 values can be changed only during PU operation.)
Parameter
Indica-
tion
Name
Setting
Range
Minimum
Setting
Increments
Factory
Setting
Refer
To:
Cus-
tomer
Setting
0 Torque boost 0 to 15% 0.1%
6%/5%/
4%/3%/
2%
(*1)
73
1 Maximum frequency 0 to 120Hz 0.1Hz 60Hz 74
2 Minimum frequency 0 to 120Hz 0.1Hz 0Hz 74
3 Base frequency 0 to 120Hz 0.1Hz 60Hz 75
4
Multi-speed setting
(high speed)
0 to 120Hz 0.1Hz 60Hz 77
5
Multi-speed setting
(middle speed)
0 to 120Hz 0.1Hz 30Hz 77
6
Multi-speed setting
(low speed)
0 to 120Hz 0.1Hz 10Hz 77
7 Acceleration time 0 to 999s 0.1s
5s/15s
(*2)
78
8 Deceleration time 0 to 999s 0.1s
10s/30s
(*2)
78
9
Electronic thermal O/L
relay
0 to 100A 0.1A
Rated
inverter
current
80
30
Extended function
display selection
0, 1 1 0 90
79
Operation mode
selection
0 to 4, 7, 8 1 0 120