Filter
Top Products
23
Main circuit terminals
1
WIRING
3) Harmonic suppression technique requirement
If the outgoing harmonic current is higher than; maximum value per 1kW (contract
power) × contract power, a harmonic suppression technique is required.
4) Harmonic suppression techniques
Table 5 Rated Capacities and Outgoing Harmonic Currents for Inverter Drive
(with filter pack)
Applied
Motor
(kW)
Rated
Current
[A]
6.6kV
Equivalent of
Fundamental
Wave
Current (mA)
Rated
Capacity
(kVA)
Outgoing Harmonic Current Converted from 6.6kV
(with filter pack, 100% operation ratio)
400V 5th 7th 11th 13th 17th 19th 23rd 25th
0.4 0.81 49 0.57 14.7 6.37 4.12 2.45 2.30 1.57 1.47 1.08
0.75 1.37 83 0.97 24.9 10.76 6.97 4.15 3.90 2.66 2.49 1.83
1.5 2.75 167 1.95 50.10 21.71 14.03 8.35 7.85 5.34 5.01 3.67
2.2 3.96 240 2.81 72.00 31.20 20.16 12.00 11.28 7.68 7.20 5.28
3.7 6.50 394 4.61 118.2 51.2 33.10 19.70 18.52 12.61 11.82 8.67
5.5 9.55 579 6.77 173.7 75.27 48.64 28.95 27.21 18.53 17.37 12.74
7.5 12.8 776 9.07 232.8 100.9 65.18 38.80 36.47 24.83 23.28 17.07
11 18.5 1121 13.1 336.3 145.7 94.16 56.05 52.69 35.87 33.63 24.66
15 24.9 1509 17.6 452.7 196.2 126.8 75.45 70.92 48.29 45.27 33.20
No. Item Description
1
Reactor installation
(ACL, DCL)
Install a reactor (ACL) in the AC side of the inverter or a reactor
(DCL) in its DC side or both to suppress outgoing harmonic
currents. (The DC reactor has already been installed in the type
with filter pack.)
2
Installation of power
factor improving
capacitor
When used with a series reactor, the power factor improving
capacitor has an effect of absorbing harmonic currents.
3
Transformer multi-
phase operation
Use two transformers with a phase angle difference of 30
° as in -
∆, ∆-∆ combination to provide an effect corresponding to 12 pulses,
reducing low-degree harmonic currents.
4
Passive
(AC filter)
A capacitor and a reactor are used together to reduce impedances
at specific frequencies, producing a great effect of absorbing
harmonic currents.
5
Active filter This filter detects the current of a circuit generating a harmonic
current and generates a harmonic current equivalent to a difference
between that current and a fundamental wave current to suppress
a harmonic current at a detection point, providing a great effect of
absorbing harmonic currents.