Filter
Top Products
137
Calibration parameters
2
FUNCTIONS
2.13 Calibration parameters
2.13.1 Meter (frequency meter) calibration (C1 )
The parameter number in parentheses is the one for use with the parameter unit (FR-
PU04).
By using the operation panel or parameter unit, you can calibrate an analog
meter connected to terminal FM to full scale deflection.
Terminal FM provides the pulse output. By setting the calibration parameter
C1, you can use the parameter to calibrate the analog meter connected to the
inverter without providing a calibration resistor.
Parameter Name Factory Setting Setting Range Remarks
C1 (900)
FM terminal
calibration
Setting is enabled when
Pr. 30 = "1"