Filter
Top Products
Appendix DMemory Areas
457
Word(s) FunctionBit(s)
273
00 Save IOM to Cassette Bit
Data transferred to Memory Cassette when Bit is turned
ON in PROGRAM mode. Bit will automaticall
y
turn OFF.
01 Load IOM from Cassette Bit
ON
in
PROGRAM
mode
.
Bit
will
automatically
turn
OFF
.
An error will be produced if turned ON in any other
mode.
02 to 11 Reserved by system (not accessible by user)
12 Transfer Error Flag: Not
PROGRAM mode
Data will not be transferred from IOM to the Memory
Cassette if an error occurs (except for Read Only Error).
13 Transfer Error Flag: Read Only
(y)
14 Transfer Error Flag: Insufficient
Capacity or No IOM
15 Transfer Error Flag: Checksum
Error
274 00 Special I/O Unit #0 Restart Flag
These flags will turn ON during restart processing.
Th fl ill ON f U i Sl R k
01 Special I/O Unit #1 Restart Flag
ggg
These flags will not turn ON for Units on Slave Racks.
02 Special I/O Unit #2 Restart Flag
03 Special I/O Unit #3 Restart Flag
04 Special I/O Unit #4 Restart Flag
05 Special I/O Unit #5 Restart Flag
06 Special I/O Unit #6 Restart Flag
07 Special I/O Unit #7 Restart Flag
08 Special I/O Unit #8 Restart Flag
09 Special I/O Unit #9 Restart Flag
10 to 15 Reserved by system (not accessible by user)
275
00 PC Setup Startup Error (DM 6600 to DM 6614)
01 PC Setup RUN Error (DM 6615 to DM 6644)
02 PC Setup Communications/Error Setting/Misc. Error (DM 6645 to DM 6655)
03 to 15 Reserved by system (not accessible by user)
276
00 to 07 Minutes (00 to 59)
Used for time increments.
08 to 15 Hours (00 to 23)
277 to 279 00 to 15 Used for keyboard mapping. See page 368.
280 to 289 00 to 15 Reserved by system (not accessible by user)
290 to 293 00 to 15 Macro Area inputs.
294 to 297 00 to 15 Macro Area outputs.
298 to 299 00 to 15 Reserved by system (not accessible by user)