426
Parameters Model Code
“Model code” indicates the PC model in two digits hexadecimal.
Model code Model
01 C250
02 C500
03 C120
0E C2000
10 C1000H
11 C2000H/CQM1
12 C20H/C28H/C40H/C200H/C200HS
20 CV500
21 CV1000
22 CV2000
40 CVM1-CPU01-E
41 CVM1-CPU11-E
11-3-29 TEST–– TS
Returns, unaltered, one block of data transmitted from the host computer.
Command Format
@ TS
x 10
0
x 10
1
: ↵
Node no. Header
code
Characters
122 characters max.
TerminatorFCS
Response Format
@ TS
x 10
0
x 10
1
: ↵
Node no. Header
code
Characters
122 characters max.
TerminatorFCS
Parameters Characters (Command, Response)
For the command, this setting specifies any characters other than the carriage
return (CHR$(13)). For the response, the same characters as specified by the
command will be returned unaltered if the test is successful.
11-3-30 PROGRAM READ –– RP
Reads the contents of the PC user’s program area in machine language (object
code). The contents are read as a block, from the beginning to the end.
Command Format
@ RP
x 10
0
x 10
1
↵:
Node no. Header
code
TerminatorFCS
Response Format
@ RP
x 10
0
x 10
1
x 16
1
x 16
0
↵:
x 16
1
x 16
0
Node no. Header
code
End code 1 byte
Program (for entire UM area)
TerminatorFCS
Host Link Commands
Section 11-3