Filter
Top Products
411
11-3-9 LR AREA WRITE –– WL
Writes data to the LR area, starting from the specified word. Writing is done word
by word.
Command Format
@ WL
FCS
x 10
1
x 10
0
x 10
3
x 10
2
: ↵
x 10
1
x 10
0
x 16
3
x 16
2
x 16
1
x 16
0
Node no. Header
code
TerminatorWrite data (1 word)
Write data
(for number of words to write )
Beginning word
(0000 to 0063)
Response Format
@ WL
x 10
1
x 10
0
x 16
1
x 16
0
: ↵
FCSNode no. End codeHeader
code
Terminator
Parameters Write Data (Command)
Specify in order the contents of the number of words to be written to the LR area
in hexadecimal, starting with the specified beginning word.
Note If data is specified for writing which exceeds the allowable range, an error will be
generated and the writing operation will not be executed. If, for example, 60 is
specified as the beginning word for writing and five words of data are specified,
then 64 will become the last word for writing data, and the command will not be
executed because LR 64 is beyond area boundary.
11-3-10 HR AREA WRITE –– WH
Writes data to the HR area, starting from the specified word. Writing is done word
by word.
Command Format
@ WH
FCS
x 10
1
x 10
0
x 10
3
x 10
2
: ↵
x 10
1
x 10
0
x 16
3
x 16
2
x 16
1
x 16
0
Node no. Header
code
Beginning word
(0000 to 0099)
Write data
(for no. of words to write)
Write data (1 word) Terminator
Response Format
@ WH
x 10
1
x 10
0
x 16
1
x 16
0
: ↵
FCSNode no. End codeHeader
code
Terminator
Parameters Write Data (Command)
Specify in order the contents of the number of words to be written to the HR area
in hexadecimal, starting with the specified beginning word.
Note If data is specified for writing which exceeds the allowable range, an error will be
generated and the writing operation will not be executed. If, for example, 98 is
specified as the beginning word for writing, and three words of data are speci-
fied, then 100 will become the last word for writing data, and the command will
not be executed because HR 100 is beyond area boundary.
Host Link Commands
Section 11-3