Filter
Top Products
430
11-3-35 INITIALIZE –– ::
Initializes the transmission control procedure of all the PCs connected to the
host computer. The INITIALIZE command does not use node numbers or FCS,
and does not receive a response.
Command Format
↵
@
::
11-3-36 Undefined Command –– IC
This response is returned if the header code of a command cannot be decoded.
Check the header code.
Response Format
@ IC
x 10
0
x 10
1
↵:
Node no. Header
code
TerminatorFCS
Host Link Commands
Section 11-3