Filter
Top Products
Programming
98 MS-9200UDLS PN 52750:E1 01/27/09
Pressing 2 for System Setup, while viewing Programming Screen #2, will cause the
following screens to be displayed:
3.6.5.1 Trouble Reminder
The Trouble Reminder features causes the control panel piezo to sound a reminder
‘beep’ for alarms and troubles, after the panel has been silenced. Refer to "System
Setup" on page 97, for a detailed description of this feature. Pressing 1 while
viewing System Setup Screen #1 will cause the display to toggle to Trouble Rem
On, which enables this feature. Each press of the 1 key will cause the display to
toggle between Trouble Rem On and Trouble Rem Off.
3.6.5.2 Banner
The top line of the display, which appears when the control panel is in normal mode,
can be changed by using the Banner option. Pressing 2 while viewing System Setup
Screen #1 will cause the following to be displayed:
Pressing 1 while viewing the Banner Screen will select the blank factory default
banner setting and display the following screen:
PROGRAMMING
1=LOOP SETUP
2=SYSTEM SETUP
3=VERIFY LOOP
Programming Screen #2
SYSTEM SETUP
1=TROUBLE REM OFF
2=BANNER
3=TIME-DATE
System Setup Screen #1
SYSTEM SETUP
1=TIMERS
2=NAC
3=RELAYS
System Setup Screen #2
SYSTEM SETUP
1=CANADIAN OPT. OFF
2=WATERFLOW SIL. NO
System Setup Screen #3
See Page
BANNER
1=FACTORY
2=USER DEFINED
Banner Screen
BANNER
1=FACTORY
2=USER DEFINED
Banner Screen
FACTORY BANNER
Factory Banner Screen