Filter
Top Products
Programming
MS-9200UDLS PN 52750:E1 01/27/09 119
Pressing 1 for Type will display the following screens:
Press the number corresponding to the module/device type that is installed with the
selected address.
Note: If the module type selected is the ANN-80, ANN-S/PG or ANN-AUDIO or if
Not Installed is selected, the ANN-BUS Address Screen shown on the previous
page will be displayed following the module selection. The options selected for
each of these modules will be the same for all modules of the same type (refer to
"ANN-S/PG (Print) Options" on page 129 and "ANN-80 Options" on page 130).
If ANN-I/O, ANN-LED or ANN-RLY is the selected module type, the following
ANN-BUS Address Screen will be displayed:
Since the options for each of these module types can be individually set, pressing 2
for Module Options, while viewing the ANN-BUS Address Screen will display the
available options as described below.
ANN-BUS MODULE TYPE
1=NOT INSTALLED
2=ANN-80 MODULE
3=ANN-I/O MODULE
Module Type Screen #1
ANN-BUS MODULE TYPE
1=ANN-S/PG MODULE
2=ANN-LED MODULE
3=ANN-RLY MODULE
Module Type Screen #2
ANN-BUS MODULE TYPE
1=ANN-AUDIO
Module Type Screen #3
ANN-BUS MODULES
ANN-BUS ADDRESS #
1=TYPE ANN-I/O
2=MODULE OPTIONS
ANN-BUS Address Screen