Filter
Top Products
Programming
114 MS-9200UDLS PN 52750:E1 01/27/09
Pressing 2 for View Points while viewing the Unit In Walktest screen will display one
of the following screens:
If the system has no points installed, the first screen will be displayed. If points are
installed, the second screen will be displayed, which allows the viewing of all untested
system points and their status relating to the current walktest session. The up and down
arrow keys will allow viewing of all untested points. If a point is tested while it is being
displayed, the screen will update and display the next untested point. The first line
indicates the total number of untested points. The second line displays information
about an untested point. A description on the bottom of the screen will indicate if the
displayed point has been disabled, if the Walktest option has been disabled for that
point or if the point is not yet tested. The up and down arrow keys allow the user to
scroll through all untested points.
Pressing 3 for View Summary while viewing the Unit In Walktest screen will display a
new screen which will show a total of the tested detectors, tested modules, untested
detectors and untested modules for the current walktest session.
The user can perform a one-person walktest by activating devices throughout the
system. As each device is activated, the information about the activated device is
stored in the Walktest Log. The information can be viewed by choosing one of the
options from the Unit In Walktest screen.
To end the Walktest session, press the Escape key to return to the Walktest screen.
Pressing 3 for View Results while viewing the Walktest screen, after a walktest session
has been completed, will allow the operator to view the final results of the most recent
walktest. The following screen will be displayed:
Use the up and down arrow keys to view all of the walktest results which will be
displayed. Note that the Walktest log is stored in RAM. If all power (AC and DC) is
removed from the FACP, the Walktest log information will be lost. This information is
also overwritten when subsequent walktests are performed.
NO POINTS IN
SYSTEM
OR
UNTESTED POINTS 010
1D001 SMOKE (PHOTO)
*********************
NOT TESTED
WALKTEST RESULTS
View Result Screen