COMMAND DETAILS
logging (p. 84)ip (p. 83)arp (p. 83)
neighbors (p. 84)ipv6 (p. 84)client-public-key (p. 83)
ospf-statistics (p. 84)keyfile (p. 84)crypto (p. 83)
statistics (p. 85)keylist (p. 84)if-ip (p. 83)
link-keepalive (p. 84)intrusion-flags (p. 83)
arp
■ clear arp
Flush all non-permanent entries in the ARP cache.
client-public-key
■ clear crypto client-public-key
Remove client public keys from active conguration.
Next Available Option:
■ keyfile < manager | operator > -- Remove client public keys from active configuration.(p. 84)
crypto
■ clear crypto
Remove client public keys from active conguration.
Next Available Option:
■ client-public-key -- Remove client public keys from active configuration.(p. 83)
if-ip
■ clear ip ospf-statistics IP-ADDR
specify ip-address whose statistics is to be cleared.
intrusion-flags
■ clear intrusion-flags
Reset the Alert Flag on all ports.
ip
■ clear ip
Clear all IP information.
Next Available Option:
■ ospf-statistics -- Usage: clear ip ospf-statistics [ <ip-address>] Clears OSPF interface statistics
If [<ip-address>] specified clears statistics for a given interface if the interface is OSPF enabled.
(p. 84)
83© 2009 Hewlett-Packard Development Company, L.P.
clearCommand Line Interface Reference Guide
