![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/1/46/14651ff9-768d-4b79-9311-420a5abc824b/14651ff9-768d-4b79-9311-420a5abc824b-bg109.png)
■ bandwidth-min -- Enable/disable and configure guaranteed minimum bandwidth settings for
outgoing traffic on the port(s)(p. 226)
■ rate-limit -- Enable/disable and configure rate-limiting for all traffic (or for incoming ICMP
traffic) on the port(s)(p. 271)
■ link-keepalive -- Configure UDLD on port(s)(p. 248)
■ arp-protect -- Configure the port as trusted or untrusted(p. 223)
■ qinq -- Configure a port's type as customer-network or provider-network(p. 268)
■ ipv6 -- Configure various IP parameters for the VLAN(p. 244)
■ service-policy -- Apply the QoS/Mirror policy on the interface (ASCII-STR) (p. 275)
port-name
■ interface [ETHERNET] PORT-LIST name PORT-NAME
Specify a port name up to 64 characters length.
■ [no] interface vlan VLAN-ID ip forward-protocol udp IP-ADDR < dns | ntp | netbios-ns | ... >
Supported Values:
■ dns -- Domain Name Service (53)
■ ntp -- Network Time Protocol (123)
■ netbios-ns -- NetBIOS Name Service (137)
■ netbios-dgm -- NetBIOS Datagram Service (138)
■ radius -- Remote Authentication Dial-In User Service (1812)
■ radius-old -- Remote Authentication Dial-In User Service (1645)
■ rip -- Routing Information Protocol (520)
■ snmp -- Simple Network Management Protocol (161)
■ snmp-trap -- Simple Network Management Protocol (162)
■ tftp -- Trivial File Transfer Protocol (69)
■ timep -- Time Protocol (37)
port-num
■ [no] interface vlan VLAN-ID ip forward-protocol udp IP-ADDR TCP/UDP-PORT
UDP port number of the server.
port-type
■ interface [ETHERNET] PORT-LIST qinq port-type
Congure qinq port-type
Next Available Options:
■ customer-network -- Configure qinq port-type as customer-network(p. 229)
■ provider-network -- Configure qinq port-type as provider-network(p. 267)
power-over-ethernet
■ [no] interface [ETHERNET] PORT-LIST power-over-ethernet
Usage: [no] power-over-ethernet [critical|high|low]
Description: Enable/Disable per-port power distribution. Specifying critical,
high, or low indicates the priority of the port to get power in
263© 2009 Hewlett-Packard Development Company, L.P.
interfaceCommand Line Interface Reference Guide