Next Available Options:
■ append -- Add the key(s) for operator access.(p. 102)
■ operator -- Replace the key(s) for operator access (default); follow with the 'append' option to
add the key(s).(p. 119)
■ manager -- Replace the key(s) for manager access; follow with the 'append' option to add the
key(s).(p. 117)
■ copy command-output COMMAND-OUTPUT tftp IP-ADDR FILENAME
Specify lename for the TFTP transfer.
Next Available Options:
■ unix -- Change CR/LF to unix style.(p. 131)
■ pc -- Change CR/LF to PC style.(p. 120)
■ copy command-output COMMAND-OUTPUT tftp IPV6-ADDR FILENAME
Specify lename for the TFTP transfer.
Next Available Options:
■ unix -- Change CR/LF to unix style.(p. 131)
■ pc -- Change CR/LF to PC style.(p. 120)
■ copy command-output COMMAND-OUTPUT usb FILENAME
Specify lename for the USB transfer.
■ copy config < config1 | config2 | config3 > tftp IP-ADDR FILENAME
Specify lename for the TFTP transfer.
Next Available Options:
■ unix -- Change CR/LF to unix style.(p. 131)
■ pc -- Change CR/LF to PC style.(p. 120)
■ copy config < config1 | config2 | config3 > tftp IPV6-ADDR FILENAME
Specify lename for the TFTP transfer.
Next Available Options:
■ unix -- Change CR/LF to unix style.(p. 131)
■ pc -- Change CR/LF to PC style.(p. 120)
■ copy crash-data SLOT-ID-RANGE tftp IP-ADDR FILENAME
Specify lename for the TFTP transfer.
■ copy crash-data SLOT-ID-RANGE tftp IPV6-ADDR FILENAME
Specify lename for the TFTP transfer.
113© 2009 Hewlett-Packard Development Company, L.P.
copyCommand Line Interface Reference Guide
