Supported Values:
■ primary -- Copy image primary flash.
■ secondary -- Copy image secondary flash.
■ copy flash usb FILENAME < primary | secondary >
Copy from primary/secondary ash.
Supported Values:
■ primary -- Copy image primary flash.
■ secondary -- Copy image secondary flash.
event-log
■ copy event-log
Copy event log le.
Next Available Options:
■ tftp -- Copy data to a TFTP server.(p. 124)
■ xmodem -- Use xmodem on the terminal as the data destination.(p. 135)
■ usb -- Copy data to a USB flash drive.(p. 133)
filename
■ copy tftp command-file IP-ADDR FILENAME
Specify lename for the TFTP transfer.
Next Available Options:
■ unix -- Change CR/LF to unix style.(p. 131)
■ pc -- Change CR/LF to PC style.(p. 120)
■ copy tftp command-file IPV6-ADDR FILENAME
Specify lename for the TFTP transfer.
Next Available Options:
■ unix -- Change CR/LF to unix style.(p. 131)
■ pc -- Change CR/LF to PC style.(p. 120)
■ copy tftp flash IP-ADDR FILENAME
Specify lename for the TFTP transfer.
Next Available Option:
■ cv_flash < primary | secondary > -- Copy to primary/secondary flash.(p. 107)
■ copy tftp flash IPV6-ADDR FILENAME
Specify lename for the TFTP transfer.
109© 2009 Hewlett-Packard Development Company, L.P.
copyCommand Line Interface Reference Guide
