Next Available Options:
■ port-list -- Show summary of network traffic handled by the ports ([ethernet] PORT-LIST) (p.
578)
■ config -- Show configuration information(p. 540)
■ display -- Show summary of network traffic handled by the ports(p. 549)
■ brief -- Show the ports' operational parameters(p. 535)
■ port-utilization -- Show the ports' bandwidth-utilization(p. 581)
■ custom -- Show the ports' parameters in customized order(p. 544)
intrusion-log
■ show port-security intrusion-log
Show the intrusion log records.
ip
■ show ip
Usage: show ip [...]
Description: Show the device IP conguration. Invoked without parameters
shows IP conguration for the switch or all VLANs. When
followed by a parameter displays information for a particular
IP protocol or feature. To get a list of all possible
parameters use 'show ip ?'.
Next Available Options:
■ authorized-managers -- Show IPV4 addresses allowed to manage the switch(p. 532)
■ dns -- Show configured DNS server IP addresses on the switch(p. 549)
■ client-public-key -- Show currently loaded public keys for authorized clients (NUMBER) (p. 537)
■ helper-address -- Show DHCP servers where DHCP requests received by the switch are to be
forwarded(p. 555)
■ forward-protocol -- Show server addresses where broadcast requests received by the switch
are to be forwarded based on configured port(p. 552)
■ icmp -- Show ICMP Rate Limiting settings(p. 556)
■ host-public-key -- Display the SSH host RSA public key (NUMBER) (p. 555)
■ igmp -- Invoked without any parameters, shows per-VLAN IGMP status, or, if VLANs are disabled
displays the global IGMP status(p. 556)
■ irdp -- Show IRDP (ICMP Router Discovery Protocol) settings(p. 563)
■ ospf -- Show OSPF operational and configuration information(p. 574)
■ rip -- Show RIP operational and configuration information(p. 586)
■ route -- Show the IP routing table(p. 587)
■ ssh -- Show both current SSH configuration and the status of active connections(p. 593)
■ mroute -- Show IP multicast routing table(p. 571)
■ pim -- Show PIM protocol operational and configuration information(p. 576)
■ source-lockdown -- Show Dynamic IP Lockdown configuration. (p. 592)
■ source-binding -- Show Dynamic IP Lockdown trap status. (p. 592)
ip-addr
■ show ip route IP-ADDR
Destination IP address to display the routes to.
561© 2009 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide
