packets satisfying to the lter condition can be set.
The packets satisfying to the lter condition are all
packets destined to the MAC-ADDR specied. Use
'lter source-port [ethernet] PORT-NUM ?' to get a list
of all possible actions that could be applied to the packets.
Next Available Options:
■ forward -- Set a list of ports to which forwarding of filtered packets is permitted. ([ethernet]
PORT-LIST) (p. 187)
■ drop -- Set a list of ports to which forwarding of filtered packets is not permitted. ([ethernet]
PORT-LIST) (p. 186)
named-filter
■ [no] filter source-port named-filter
Set the lter name.
Next Available Option:
■ ascii -- Set the filter name. (ASCII-STR) (p. 186)
■ filter source-port [ETHERNET] PORT-LIST named-filter NAMED-FILTER
Set the lter name.
port-list
■ [no] filter source-port [ETHERNET] PORT-LIST
Set the list of source port lters.
Next Available Options:
■ named-filter -- Set the filter name. (ASCII-STR) (p. 188)
■ forward -- Set a list of ports to which forwarding of filtered packets is permitted. ([ethernet]
PORT-LIST) (p. 187)
■ drop -- Set a list of ports to which forwarding of filtered packets is not permitted. ([ethernet]
PORT-LIST) (p. 186)
protocol
■ [no] filter protocol < ip | ipx | arp | ... >
Usage: [no] lter protocol <ip|ipx|arp|appletalk|sna|netbeui> [...]
Description: Specify protocol lter to manage.
If preceded by 'no' the command deletes the lter specied.
Otherwise, the lter is added to the system, if
it is not already there. Also, an action to apply to the
packets satisfying to the lter condition can be set.
The packets satisfying to the lter condition are all
packets of the protocol specied. Use 'lter source-port
[ethernet] PORT-NUM ?' to get a list of all possible actions
that could be applied to the packets.
Supported Values:
188© 2009 Hewlett-Packard Development Company, L.P.
filterCommand Line Interface Reference Guide
