■ authentication -- Disable authentication.(p. 717)
■ md5-auth-key-chain -- Set MD5 authentication method and key chain.(p. 734)
■ cost < 1 to 65535 > -- Set metric of this interface.(p. 721)
■ dead-interval < 1 to 65535 > -- Set dead interval in seconds; the default is 40.(p. 721)
■ hello-interval < 1 to 65535 > -- Set hello interval in seconds; the default is 10.(p. 725)
■ priority < 0 to 255 > -- Set priority of this router as a designated router.(p. 742)
■ retransmit-interval < 1 to 3600 > -- Set retransmit interval in seconds; the default is 5.(p. 746)
■ transit-delay < 1 to 3600 > -- Set transit delay in seconds; the default is 1.(p. 749)
■ ip-addr -- Specify the IP address the request is for. (IP-ADDR) (p. 729)
■ all -- Process the request for all IP addresses.(p. 715)
override-interval
■ vlan VLAN-ID ip pim-dense override-interval < 500 to 6000 >
Usage: ip pim-dense override-interval <500-6000>
Description: Set the value inserted into the Override Interval eld of
a LAN Prune Delay option on this interface. Default is 2500
milliseconds.
Range: < 500 to 6000 >
■ vlan VLAN-ID ip pim-sparse override-interval < 500 to 6000 >
Usage: ip pim-sparse override-interval <500-6000>
Description: Set the value inserted into the Override Interval eld of
a LAN Prune Delay option on this interface. Default is 2500
milliseconds.
Range: < 500 to 6000 >
owner
■ vlan VLAN-ID vrrp vrid < 1 to 255 > owner
Usage: vrrp vrid <VRID> owner
Description: Designate the virtual router instance as an Owner (Master).
There is no default value.
passive
■ [no] vlan VLAN-ID ip ospf passive
Congures an ospf interface as passive.
■ [no] vlan VLAN-ID ip ospf IP-ADDR passive
Congures an ospf interface as passive.
■ [no] vlan VLAN-ID ip ospf all passive
Congures an ospf interface as passive.
pim-dense
■ [no] vlan VLAN-ID ip pim-dense
739© 2009 Hewlett-Packard Development Company, L.P.
vlanCommand Line Interface Reference Guide
