A SERVICE OF

logo

Open as PDF
next previous
config
■ show access-list config
Show all congured ACL's on the switch using
the CLI syntax used to create them.
■ show access-list ACL-NAME config
Show all congured ACL's on the switch using
the CLI syntax used to create them.
■ show config
Usage: show cong [les | FILENAME | status]
Description: Show the switch startup conguration.
Parameters:
o les - list switch conguration les. Shows which le is active
and which are associated with primary and secondary images.
o FILENAME - show specied conguration instead of active conguration.
o status - check if there are changes in running conguration not
saved to the startup conguration le.
Next Available Options:
■ status -- Check if the running configuration differs from the statup configuration.(p. 596)
■ files -- List saved configuration files.(p. 551)
■ filename < config | config1 > -- Display specified configuration.(p. 551)
■ show interfaces config
Usage: show interfaces cong
Description: Show conguration information.
■ show ip igmp VLAN-ID config
Show IGMP conguration information for the VLAN specied.
■ show ip igmp config
Show IGMP conguration information.
■ show ip pim rp-candidate config
Show C-RP conguration information.
■ show ipv6 mld vlan VLAN-ID config
Show MLD conguration information for the VLAN specied.
■ show ipv6 mld config
Show MLD conguration information.
■ show lldp config
Usage: show lldp cong [[ethernet] PORT-LIST]]
540© 2009 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide