snmpv3
OVERVIEW
Category:
configPrimary context:
show snmpv3 (page 591)Related Commands
show snmp-server (page 591)
Usage: [no] snmpv3 <community|group|notify|params|restricted-access|
targetaddress|user>
Description: Congure SNMPv3 features.
NOTES
IPv6 Supported Commands
IPv6 addressing is supported for the following commands:
■ snmpv3 targetaddress <name> params <params-name>
for
■ addr-mask <ip-addr>
■ filter <none | debug | all | not-info | critical>
■ max-msg-size <484 - 65535>
■ port-mask <tcp-udp port>
■ retries <0-255>
■ taglist <tag-name>
■ timeout <0 - 2147483647>
■ udp-port-number <port-number>
COMMAND STRUCTURE
■ [no] snmpv3 community -- Configure SNMPv3 Community entry. (p. 626)
■ index -- Set community index. (ASCII-STR) (p. 627)
■ name -- Set community name. (ASCII-STR) (p. 628)
■ sec-name -- Set security name. (ASCII-STR) (p. 631)
■ tag -- Set tag value for the community (ASCII-STR) (p. 631)
■ [no] snmpv3 enable -- Enable SNMPv3. (p. 626)
■ [no] snmpv3 engineid -- Configure SNMPv3 engineID. (ASCII-STR) (p. 626)
■ [no] snmpv3 group < ManagerPriv | ManagerAuth | OperatorAuth | ... > -- Configure SNMPv3
User to Group entry. (p. 627)
■ user -- Set user to be added to the group. (ASCII-STR) (p. 632)
■ sec-model < ver1 | ver2c | ver3 > -- Set security model to be used. (p. 631)
■ [no] snmpv3 notify -- Configure SNMPv3 Notification entry. (ASCII-STR) (p. 628)
623© 2009 Hewlett-Packard Development Company, L.P.
