A SERVICE OF

logo

Open as PDF
next previous
svlan
OVERVIEW
Category:
configPrimary context:
qinq (page 409)Related Commands
vlan (page 706)
show qinq (page 582)
show svlans (page 597)
Usage: [no] svlan VLAN-ID [...]
Description: Add, delete, edit SVLAN conguration or enter a SVLAN context.
If an existing 'SVLAN VLAN-ID' is specied you are put into the
context for that SVLAN, and can then execute commands for that
SVLAN. If a new VLAN-ID is specied, the new SVLAN is added with
the VLAN-ID, and you are put into the context of the new SVLAN.
If you follow the command with one of the SVLAN Context commands
in the same command line, the context level is not changed, but
the commands are executed for the SVLAN specied by the
VLAN-ID.
The 'no' option of the SVLAN command is used to delete
the SVLAN specied by VLAN-ID. If one or more ports belong only
to the S-VLAN to be deleted, the CLI noties you that these ports
will be moved to the default VLAN and prompts you to continue the
deletion.
NOTES
SVLANS
S-VLANS are used to tunnel customer frames throught the provider network to customer
sites. These are managed by the service provider who can assign each customer a unique
S-VLAN_ID.
COMMAND STRUCTURE
■ svlan VLAN-ID auto -- Cause each port identified in the port list to learn its VLAN membership
using the GARP VLAN Registration Protocol (GVRP) ([ethernet] PORT-LIST) (p. 665)
■ svlan VLAN-ID connection-rate-filter -- Re-enables access to a host or set of hosts that has been
previously blocked by the connection rate filter (p. 666)
■ unblock -- Resets a host previously blocked by the connection rate filter (p. 672)
■ all -- Resets all previously blocked by the connection rate filter (p. 665)
■ host -- Match packets from the specified IP address. (IP-ADDR) (p. 667)
■ src-ip -- Match packets from the specified subnet. (IP-ADDR/mask-LENGTH) (p. 671)
■ [no] svlan VLAN-ID dhcp-snooping -- (p. 666)
■ [no] svlan VLAN-ID forbid -- Prevent ports from becoming a member of the current VLAN ([ethernet]
PORT-LIST) (p. 667)
■ svlan VLAN-ID ip -- Configure various IP parameters for the VLAN (p. 667)
■ access-group -- Apply the specified access control list on this VLAN interface (ASCII-STR) (p.
663)
■ direction < in | out | connection-rate-filter | ... > -- (p. 666)
■ address -- Set IP parameters for communication within an IP network (p. 664)
661© 2009 Hewlett-Packard Development Company, L.P.