Supported Values:
■ V1-only -- Use RIP version 1 only.
■ V2-only -- Use RIP version 2 only.
■ V1-or-V2 -- Use RIP 2 in the RIP 1 compatible mode.
send
■ interface vlan VLAN-ID ip rip send < disabled | V1-only | V1-compatible-V2 | ... >
Dene RIP version for outgoing packets.
Supported Values:
■ disabled -- Do not send RIP updates.
■ V1-only -- Send RIP version 1 updates only.
■ V1-compatible-V2 -- Send RIP 2 updates using RFC 1058 route subsumption.
■ V2-only -- Send RIP version 2 updates only.
■ interface vlan VLAN-ID ip rip IP-ADDR send < disabled | V1-only | V1-compatible-V2 | ... >
Dene RIP version for outgoing packets.
Supported Values:
■ disabled -- Do not send RIP updates.
■ V1-only -- Send RIP version 1 updates only.
■ V1-compatible-V2 -- Send RIP 2 updates using RFC 1058 route subsumption.
■ V2-only -- Send RIP version 2 updates only.
■ interface vlan VLAN-ID ip rip all send < disabled | V1-only | V1-compatible-V2 | ... >
Dene RIP version for outgoing packets.
Supported Values:
■ disabled -- Do not send RIP updates.
■ V1-only -- Send RIP version 1 updates only.
■ V1-compatible-V2 -- Send RIP 2 updates using RFC 1058 route subsumption.
■ V2-only -- Send RIP version 2 updates only.
service-policy
■ [no] interface [ETHERNET] PORT-LIST service-policy SERVICE-POLICY
Usage: [no] service-policy <name> in
Description: Apply the QoS/Mirror policy on the interface.
Parameters:
o <name> - Policy name.
o in - Apply the policy in inbound direction.
Next Available Option:
■ in -- Apply policy on inbound packets. (p. 238)
■ [no] interface vlan VLAN-ID service-policy SERVICE-POLICY
Usage: [no] service-policy <name> in
Description: Apply the QoS/Mirror policy on the vlan.
Parameters:
275© 2009 Hewlett-Packard Development Company, L.P.
interfaceCommand Line Interface Reference Guide
