redundancy
OVERVIEW
Category:
managerPrimary context:
Related Commands
Usage: redundancy switchover
redundancy active-management < management-module1 |
management-module2 |
standby>
Description: Redundancy conguration for management modules.
The rst version of the command causes the switch to
immediately switchover to the standby management module.
The second version of the command makes the module specied
an active management module for next boot. This command
will fail if the other module is in a failed state.
NOTES
Multiple Contexts
This command also is available in the config context.
COMMAND STRUCTURE
■ redundancy active-management < management-module1 | management-module2 | standby >
-- Specify the management module that will be active for next boot. (NUMBER) (p. 466)
■ redundancy switchover -- Switchover to the standby management module. (p. 466)
COMMAND DETAILS
switchover (p. 466)active-management (p. 466)
active-management
■ redundancy active-management < management-module1 | management-module2 | standby >
Specify the management module that will be active for next boot.
Supported Values:
■ management-module1 -- Configures management-module 1 as an active management module
for next boot
■ management-module2 -- Configures management-module 2 as an active management module
for next boot
■ standby -- Configures standby module as an active management module for next boot
switchover
■ redundancy switchover
Switchover to the standby management module.
466© 2009 Hewlett-Packard Development Company, L.P.
