A SERVICE OF

logo

Open as PDF
next previous
Usage: show monitor
Description: Show the switch network monitoring status and
conguration, if network monitoring is enabled.
Next Available Options:
■ mirror_session_id < 1 to 4 > -- Mirror destination number.(p. 569)
■ name -- Mirror destination name.(p. 572)
■ endpoint -- Remote mirroring destination configuration.(p. 550)
motd
■ show banner motd
Usage: show banner motd
Description: show the congured banner text.
mroute
■ show ip mroute
Usage: show ip mroute [command]
Description: Show IP multicast routing table. The 'command' can be used to
obtain more detailed information of the IP multicast routing
functionality. Use 'show ip mroute ?' to get a list of all
possible commands.
Next Available Options:
■ IP-ADDR -- Show detailed information for the specified entry from the IP multicast routing table
(IP-ADDR) (p. 562)
■ interface -- Show IP multicast routing interfaces' information(p. 559)
■ show ip pim mroute
Usage: show ip pim mroute [GRP-ADDR SRC-ADDR]
Description: Show PIM-specic information from the IP multicast routing
table. Invoked without parameters shows all PIM entries from
the IP MRT. If multicast group address and source address are
specied then detailed information for the specied entry is
shown.
Next Available Option:
■ IP-ADDR -- Specify the IP multicast group address of the MRT entry. (IP-ADDR) (p. 562)
mst-config
■ show spanning-tree mst-config
Show multiple spanning tree region conguration.
■ show spanning-tree pending mst-config
Show multiple spanning tree pending region conguration.
571© 2009 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide