■ none -- Do not use authentication.
■ text -- Use simple password.
auth-key-text
■ interface vlan VLAN-ID ip rip authentication-key OCTET-STR
Set RIP authentication key (maximum 16 characters).
■ interface vlan VLAN-ID ip rip IP-ADDR authentication-key OCTET-STR
Set RIP authentication key (maximum 16 characters).
■ interface vlan VLAN-ID ip rip all authentication-key OCTET-STR
Set RIP authentication key (maximum 16 characters).
auto
■ interface vlan VLAN-ID auto [ETHERNET] PORT-LIST
Usage: [no] auto [ethernet] PORT-LIST
Description: Cause each port identied in the port list to learn its
VLAN membership using the GARP VLAN Registration Protocol
(GVRP). This command is only valid when GVRP is enabled.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
■ interface vlan VLAN-ID ip igmp auto [ETHERNET] PORT-LIST
Usage: ip igmp auto [ethernet] PORT-LIST
Description: Instruct the device to monitor incoming multicast trafc
on the specied ports (this is the default behavior). This
feature is congured on a per-VLAN basis.
■ interface vlan VLAN-ID ipv6 mld auto [ETHERNET] PORT-LIST
Usage: vlan < vid > ipv6 mld auto < port-list >
Description: Instruct the device to monitor incoming multicast trafc
on the specied ports (this is the default behavior). This
feature is congured on a per-VLAN basis.
■ interface svlan VLAN-ID auto [ETHERNET] PORT-LIST
Usage: [no] auto [ethernet] PORT-LIST
Description: Cause each port identied in the port list to learn its
VLAN membership using the GARP VLAN Registration Protocol
(GVRP). This command is only valid when GVRP is enabled.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
autoconfig
■ [no] interface vlan VLAN-ID ipv6 address autoconfig
225© 2009 Hewlett-Packard Development Company, L.P.
interfaceCommand Line Interface Reference Guide
