Filter
Top Products
Pelco Manual C501M-B (10/97) 5-5
5.4 MENU BAR
5.4.1 Main Menu Bar and On-Screen
Function Buttons
The Main Menu Bar is accessible to all operators with
a user description of MGR or SPR and allows access to
system programming functions (see Section 5.5.1.2 for
additional information). The availability of any menu
item to a specific user is established by the user’s pri-
ority. Users with a user description of GRD only will
have access to the On-Screen Function Buttons located
on the lower portion of the monitor.
To gain access to this menu, simply press [ENTER]
on the numeric keypad.
To access any of the pull-down menus available from
this menu bar, move the cursor to the desired selection,
press the [point] button and hold to reveal the pull-
down menu. With the [point] button still pressed, drag
the cursor to the desired selection to highlight. Once
highlighted, release the [point] button to access that
menu item.
If the wrong pull-down screen has been accessed, sim-
ply drag the cursor to a blank area of the monitor screen
and release the [point] button. The Main Menu Bar
and Function buttons should remain on the data moni-
tor.
To select any of the On-Screen Function Buttons, posi-
tion the cursor on the desired function and press the
[point] button.
To clear the Main Menu Bar, any selected menus or
programming screens, press the [CLEAR] key.
Figure 16. Main Menu Bar
Mon: XX Cam: XX
Cam On
Aux 2
Aux 1
Aux 4 Aux 6 Aux 8
Manscan Zone Off
Zone OnAutoscan
Aux 7Aux 5Aux 3
RxReset
Log Off
System Cam Keybrd User Seq AlrmRel Tour Event Logoff