Filter
Top Products
5-4 Pelco Manual C501M-B (10/97)
NOTE: There must be a space between the
user field [1] and the user ID [99999].
The data monitor will now display monitor and camera
at the bottom of the screen.
The system is now be ready for initial programming
and/or operation.
Figure 15. Log On Screen with On-Screen Keyboard
09:10:12
Ent
0987654321
QWERTYU OP
L
MNBVCXZ
ASDFGHJK
I
Log On
Bkspc
5.3 INITIAL POWER-UP
5.3.1 Keyboard and Monitor
Requirements
For initial power up and subsequent use, the operator
must be at a keyboard that is directly connected to a
monitor (refer to Figure 10). This is referred to as the
data monitor.
5.3.2 Initial User ID Prompt
After initial power-up, the CPU will run an initializa-
tion program, then a “logon” prompt will appear on the
data monitor. Press [enter]. At this time an on-screen
keyboard will appear on the data monitor screen. Refer
to Figure 13.
Using the joystick and the [point] button, Enter: [1]
[99999][enter]