Filter
Top Products
10. ASSEMBLY
KE-430F, BE-438F
81
10-4. Thread wiper mechanism
Apply grease to the portions indicated by the white arrows.
1. Thread wiper rod assembly [Insert from the front]
2. Wiper shaft
3. Plain washer
4. Retaining ring, E
5. Set screw [Tighten]
6. O rings [2 pcs]
7. Connecting plate
8. Plain washer
9. Retaining ring, E
10. Thread wiper arm assembly
11. Plain washers [2 pcs]
12. Screws [2 pcs]
13. Retaining ring, E
14. Set screw [Tighten]
2838B
少量
Gently push the wiper shaft 2 while
tightening the set screw 5.
Adjust while referring to “11-15.
Adjusting the thread wiper”
.