Filter
Top Products
10. ASSEMBLY
KE-430F, BE-438F
97
2875B
2876B
2877B
After applying sealant (Threebond 1215) to the
shaded area, install the gear cover 24 by tightening
the five screws 25 at a torque of 1 Nm.
24. Gear cover
25. Screws [5 pcs]
26. Grease support F
27. Screws [2 pcs]
28. Rubber caps [2 pcs]
Remove the rubber cap (1) and apply grease,
and then reinstall the rubber cap (1).
Insert as far as this
16g of grease
(1) Rubber cap
1) Turn the pulley to set the needle bar to
near its lowest position.
2) Insert the grease nozzle (3) into the
gear box as far as the lower shaft gear
(2), and apply 16g of grease (BZL-500
grease).