Filter
Top Products
7. USING SD CARDS
45
KE-430F, BE-438F
7-4. Reading additional pattern data
1
Select the “ r 1” SD data read/write mode.
(Refer to “7-3. Preparation for reading and writing data”.)
・ The number of the additional pattern data in the SD
card folder will appear in the tension display.
(The initial value displayed is “ALL”.)
2
Press the
or key to select the number for the
additional pattern that you would like to be read (ALL,
200 to 999).
・ When “ALL” is displayed, all of the additional pattern
data will be read at once.
・ The additional pattern numbers displayed will only be
those that are in the SD card folders. (If there is no
data on the card, “ALL” will be the only thing
displayed.)
3
While reading
Pattern number being read
appears in the tension display
Press the ENTER key.
・ The buzzer will sound and the selected pattern data
will be read from the folder on SD card and copied into
the sewing machine’s memory.
・ If no additional pattern data exists, an error buzzer will
sound.
4
When the display returns to the status in step 1, reading
of the additional pattern data is complete.
・ If you would like to use any other read/write modes,
press the
or key to select the mode and then
run it.
5
Ending read/write mode
TEST indicator switches off
Press the TEST key.
* To sew a pattern that you want to add, register a
program while referring to “5-2. Program setting
method” in the CD Instruction Manual.
2651B
2656B
2414B
2657B 2658B
2654B
For example, to read pattern
number 200
2404B