Filter
Top Products
7. USING SD CARDS
49
KE-430F, BE-438F
7-8. Reading program data
1
Select the “ r5” SD data read/write mode.
(Refer to “7-3. Preparation for reading and writing data”.)
2
While reading
“PrG” appears in the tension
display
Press the ENTER key.
・ The buzzer will sound and the sewing program data
and cycle program data will be read from the SD card
and stored in the sewing machine’s memory, and the
sewing programs and cycle programs will then be set.
・ If no program data or cycle program data exists, an
error buzzer will sound.
3
When the display returns to the status in step 1, reading
of the program data is complete.
・ If you would like to use any other read/write modes,
press the
or key to select the mode and then
run it.
4
Ending read/write mode
TEST indicator switches off
Press the TEST key.
2665B
2414B
2665B
2903B 2668B
2404B