Filter
Top Products
7. USING SD CARDS
47
KE-430F, BE-438F
7-6. Reading memory switch data
1
Select the “ r3” SD data read/write mode.
(Refer to “7-3. Preparation for reading and writing data”.)
2
While reading
“MEM” appears in the tension
display
Press the ENTER key.
・ The buzzer will sound and the memory switch data will
be read from the SD card and stored in the sewing
machine memory, and the memory switch settings will
then be applied.
・ If no memory switch data exists, an error buzzer will
sound.
3
When the display returns to the status in step 1, reading
of the memory switch data is complete.
・ If you would like to use any other read/write modes,
press the
or key to select the mode and then
run it.
4
Ending read/write mode
TEST indicator switches off
Press the TEST key.
2661B
2661B
2414B
2404B
2662B 2663B