Filter
Top Products
7. USING SD CARDS
51
KE-430F, BE-438F
7-10. Reading sewing machine data
1
Select the “ r7” SD data read/write mode.
(Refer to “7-3. Preparation for reading and writing data”.)
2
While reading
“MEM” appears in the tension
display while memory switch
settings are being read, the
pattern number appears while
additional pattern data is being
read, and “PrG” appears while
program data is being read
Press the ENTER key.
・ The buzzer will sound and the sewing program data,
cycle program data, memory switch settings and
additional pattern data will be read from the SD card
and stored in the sewing machine's memory.
・ If no program data or cycle program data exists, an
error buzzer will sound.
3
When the display returns to the status in step 1, reading
of the sewing machine data is complete.
・ If you would like to use any other read/write modes,
press the
or key to select the mode and then
run it.
4
Ending read/write mode
TEST indicator switches off
Press the TEST key.
2669B
2414B
2669B
2670B 2663B
2404B