Filter
Top Products
7. USING SD CARDS
52
KE-430F, BE-438F
7-11. Writing sewing machine data to an SD card
1
Select the “ w8” SD data read/write mode.
(Refer to “7-3. Preparation for reading and writing data”.)
2
While writing
“MEM” appears in the tension
display while memory switch
settings are being written, the
pattern number appears while
additional pattern data is being
written, and “PrG” appears while
program data is being written
Press the ENTER key.
・ The buzzer will sound and the sewing program data,
cycle program data, memory switch settings and
additional pattern data will be read from the SD card
and stored in the sewing machine's memory.
3
When the display returns to the status in step 1, writing of
the sewing machine data is complete.
・ If you would like to use any other read/write modes,
press the
or key to select the mode and then
run it.
4
Ending read/write mode
TEST indicator switches off
Press the TEST key.
2414B
2671B
2671B
2672B 2663B
2404B