Filter
Top Products
KE-430F, BE-438F
2. NOTES ON HANDLING
2
2. NOTES ON HANDLING
About the machine set-up location
・ Do not set up this sewing machine near other equipment such
as televisions, radios or cordless telephones, otherwise such
equipment may be affected by electronic interference from the
sewing machine.
・ The sewing machine should be plugged directly into an AC wall
outlet. Operation problems may result if extension cords are
used.
Carrying the machine
・ The machine should be carried by the arm by two people as
shown in the illustration.
・ When holding the machine head, do not hold it by the pulse
motor (1) or the solenoid (2), otherwise it may damage the
pulse motor (1) or the solenoid (2).
Tilting back the machine head
1. Pack away any tools which are near the table.
2. Secure the foot (A) so that the table will not move, and then pull
the arm with both hands to tilt back the machine head.
* While supporting the arm with both hands, gently lower it.
Returning the machine head to the upright position
1. Pack away any tools which are near the table.
2. While supporting the arm with both hands, gently return the
machine head to its original position.
2518B
2519B
2516B
2517B
2518B