Filter
Top Products
4. FUNCTION SETTINGS
23
KE-430F, BE-438F
● When using a 2-pedal foot switch (option)
The following table describes the operation of the work clamp/button clamp during sewing standby mode when using a
2-pedal foot switch.
1.
Set memory switch No. 070 to “2”.
2.
Use memory switch No. 072 to select the desired operation mode from the following.
* In the following table, the term “work clamp” refers to the work clamp/button clamp.
Work clamp switch (left side)
Setting
value
No. 072
Neutral
1st step
2nd step
Start switch
(right side)
1
Work clamp raised
Work clamp
maximum drop *
1
Work clamp raised
Work clamp
maximum drop
Work clamp
raised
Sewing
machine
start *
1
2
Work clamp raised
Work clamp
maximum drop *
1
Work clamp raised
Work clamp
intermediate drop
Work clamp
intermediate drop
Work clamp
maximum drop
Work clamp
raised
Work clamp
maximum drop
Sewing
machine
start *
1
3
Work clamp
maximum drop *
1
Work clamp
raised
Sewing
machine
start *
1
4
Work clamp raised
Work clamp
maximum drop
Sewing
machine start
5
Work clamp raised
Work clamp
intermediate
drop
Work clamp
maximum drop
+ sewing
machine start
*1 Enabled when the work clamp switch is at neutral and the work clamp/button clamp is fully lowered.
Start switch
Work clamp switch (2-step)
4923Q
2986B 2987B
1st step
Neutral
1st step
2nd step
Release
Depress
Depressed further
Release slightly