Filter
Top Products
7. USING SD CARDS
53
KE-430F, BE-438F
7-12. Writing error log data and memory switch log data to an SD card
1
Select the “ w9” SD data read/write mode.
(Refer to “7-3. Preparation for reading and writing data”.)
2
While writing
“LoG” appears in the tension
display while log data is being
written
Press the ENTER key.
・ The buzzer will sound and the error log data and
memory switch log data will be copied to the SD card.
3
When the display returns to the status in step 1, writing of
the log data is complete.
・ If you would like to use any other read/write modes,
press the
or key to select the mode and then
run it.
4
Ending read/write mode
TEST indicator switches off
Press the TEST key.
2673B
2414B
2673B
2674B 2675B
2404B