Filter
Top Products
4. FUNCTION SETTINGS
15
KE-430F, BE-438F
Operation panel settings (300 − 399)
No. Setting range Initial value Setting units Setting details
300 ON/OFF OFF -
Production counter display
ON: Production counter display
OFF: Lower thread counter display
352 ON/OFF OFF -
Production counter counting units
ON: Counted for each cycle program.
OFF: Counted for each item of sewing data.
* Counted for each individual split when No. 451 is set to
“ON”.
353 ON/OFF OFF -
Lower thread counter counting operation
ON: Counted at the sewing start.
OFF: Counted at the sewing end.
Program settings (400 − 499)
No. Setting range Initial value Setting units Setting details
401 ON/OFF OFF -
Button hole distance display
* Enabled when No. 402 is set to “ON” and (for the BE-438F)
when pattern No. 1 to 64 (buttonhole data) is selected.
ON: X-scale and Y-scale will be displayed as button hole
distances (mm).
OFF: X-scale and Y-scale will be displayed as pattern outer
dimensions (mm).
402 ON/OFF OFF -
X-scale/Y-scale mm display
* The mm display may vary from actual sewing dimensions.
ON: Displayed as mm.
OFF: Displayed as %.
404 ON/OFF ON -
Display for program numbers 1 to 89 (1 to 64 for BE-438F)
ON: Program numbers 1 to 89 (1 to 64 for the BE-438F) are
displayed during program number selection operations.
OFF: Program numbers 1 to 89 (1 to 64 for the BE-438F) are
skipped during program number selection operations so
that these numbers cannot be selected.
* If no other programs have been recorded, the setting will
return to “ON”.
405 ON/OFF ON -
Cycle program No. display (C01 to C30)
ON: Cycle program numbers are displayed during program
number selection operations.
OFF: Cycle program numbers are skipped during program
number selection operations so that these numbers
cannot be selected.
406
0 − 3
0 1
Program numbers switched by F keys
0: When the F1 to F4 keys are pressed, operation switches to
program numbers 1 to 4.
1: When the F1 to F4 keys are pressed, operation switches to
program numbers 201 to 204.
2: When the F1 to F4 keys are pressed, operation switches to
cycle program numbers C01 to C04.
3: When the F1 to F4 keys are pressed, operation switches to
the program number which has been pre-assigned to the
respective key.
Assignment to F1 key: Memory switch No. 407
Assignment to F2 key: Memory switch No. 408
Assignment to F3 key: Memory switch No. 409
Assignment to F4 key: Memory switch No. 410