Filter
Top Products
6. X AND Y PARALLEL MOVEMENT OF SEWING PATTERNS
42
KE-430F, BE-438F
6
X-scale
Parallel movement mode
Press the SELECT key so that the Y-scale indicator
flashes.
* When the SELECT key is pressed, the X-SCALE
indicator and the Y-SCALE indicator will flash
alternately.
7
Each time the
or key is pressed, the work
clamp/button clamp will move by 0.05 mm.
・ In Y-scale parallel movement mode, the work
clamp/button clamp will move forward when the
key is pressed, and backward when the
key is
pressed.
・ The range of movement is a maximum of -9.95 mm to
+9.95 mm. However, the sewing pattern cannot be
moved outside the sewing area.
8
Confirm the movement amount
Press the ENTER key.
・ The amount of parallel movement in the vertical
direction will be confirmed, and the menu display will
change to illuminated.
9
Ending parallel movement mode
TEST indicator switches off
Press the TEST key.
・ The display will return to the normal display and the
sewing machine will change to home position standby.
* If you would like to return to step 4, press the SELECT
key instead of the TEST key.
NOTE:
・ If you change the program number, the pattern number, the X-scale or the Y-scale, the movement amount which has
been stored will be reset.
・ When the power switch is turned off, the movement amount which has been stored will be reset. However, if memory
switch No. 465 is set to “2”, the movement amount will remain stored and will not be reset.
2779B
2414B
2649B
2401B
Y
-scale
Parallel movement mode
For example, set to -0.05.