Filter
Top Products
11. ADJUSTMENT
117
KE-430F, BE-438F
11-18. Adjusting the home position
11-18-1. X- and Y-feed motor home positions
1
With the power switch turned off, turn the pulley in the direction of the arrow to set the needle to the needle up stop
position (near the highest thread take-up position).
2
While pressing the keys simultaneously, turn on
the power switch.
・
"orG" will flash in the PROGRAM No. display and the
currently-recorded offset value will be displayed in the
menu display.
3
Press the SELECT key so that either the X-SCALE
indicator or the Y-SCALE indicator illuminates.
4
Depress the foot switch to the 2nd step (for a 2-pedal foot switch,
depress the start switch). (*1)
・
Home position detection for the X-feed or Y-feed motor will be
carried out based on the currently-displayed offset value.
・
"orG" will illuminate in the PROGRAM No. display.
* If you press the RESET key for 2 seconds or more at this time, the
offset value will be reset to "0" and home position detection for the
X-feed or Y-feed motor will be carried out.
(*1) When “UP” appears in the menu display and the CAUTION indicator flashes and the buzzer sounds, turn the pulley in
the direction of the arrow to move the needle bar to the up stop position (near the highest thread take-up position).
(Continued on next page.)
2788B 2789B
2790B 2401B
4441Q 2791B 2634B
2nd step