Filter
Top Products
3. RELATIONSHIP BETWEEN PROGRAMS AND PATTERNS
5
KE-430F, BE-438F
Example:
・Pattern: No. 50
・X- and Y-scale: 150%
・Sewing speed: 2700 sti/min
・Upper thread tension: 100
Program No. 200
・Pattern: No. 50
・X- and Y-scale: 50%
・Sewing speed: 2700 sti/min
・Upper thread tension: 200
Program No. 202
・Pattern: No. 50
・X- and Y-scale: 100%
・Sewing speed: 1000 sti/min
・Upper thread tension: 30
Program No. 201
・ After a program has been finished, you can revise the program by changing the setting details.
・ You can organize the use of program numbers so that, for instance, programs with the same pattern but different sizes or
upper thread tensions to suit the material being sewn are preset. (Refer to “5-2. Program setting method” in the CD
instruction manual.)
The following table shows restrictions for sewing program numbers, pattern numbers and parameters.
Standard programs
Additional available
patterns
Preset Not preset Set by user
Initial value
Model 430F 438F 430F 438F 430F / 438F 430F 438F
Sewing program No. 1 - 89 1 - 64 90 - 199 65 - 199
200 - 999
(800 programs)
1 - 89 1 - 64 1 - 999
Pattern No.
Fixed at same number as sewing
program
Number set when
program is created (512
programs from 200 to
999)
X-scale (%) 20 - 200 100
Y-scale (%) 20 - 200 100
Sewing speed (sti/min) 430F: 200 - 3200 / 438F: 200 - 2700 2700 2300
Slow start pattern Lo1 - 9 Lo8 Lo7
X parallel movement amount (mm)
When memory switch No. 465 is set to 3
-9.9 - 9.9 0.0
Y parallel movement amount (mm)
When memory switch No. 465 is set to 3
-9.9 - 9.9 0.0
Work clamp/button clamp height (high) (mm)
When memory switch No. 470 is set to ON.
430F: 10 - 17 / 438F: 6 - 13 14 10
Work clamp/button clamp height (medium) (mm)
When memory switch No. 470 is set to ON.
430F: 1 - 17 / 438F: 1 - 13 1 1
Upper thread tension setting value 0 - 300 75
Pattern: No. 50
2592B
Parameter