Filter
Top Products
12. APPLYING GREASE
129
KE-430F, BE-438F
12. APPLYING GREASE
CAUTION
Be sure to wear protective goggles and gloves when handling the lubricating oil and grease, so that they do not get
into your eyes or onto your skin, otherwise inflammation can result.
Furthermore, do not drink the oil or eat the grease under any circumstances, as they can cause vomiting and
diarrhoea.
12-1. Applying grease (Work clamp: KE-430F)
Periodically apply grease to the sliding parts of the work
clamp (1) and the work clamp arm (2).
NOTE:
After replacing the work clamp (1), be sure to apply
grease before using it.
* It is recommended that you use commercially-available
NIPPON OIL CORPORATION Powernoc WB 2 grease for
the work clamp (1).
12-2. Applying grease (When “GREASEUP” appears)
If “GrE” and “AS.UP" flash on the PROGRAM No. display (1) and the menu display (2) respectively, and a buzzer sounds
when the power switch is turned on, it means that grease needs to be applied. (The sewing machine will not operate at this
time, even if the foot switch is depressed.)
Apply grease as required, while referring to the following for details.
<To continue sewing temporarily without applying grease>
1. Press the RESET key (3).
2. The PROGRAM No. display (1) and the menu display (2) will change to the normal displays, and sewing can be carried
out by depressing the foot switch.
2907B
2312B
Grease
Viewed from directly above