Filter
Top Products
10. ASSEMBLY
KE-430F, BE-438F
101
10-15. Work clamp arm mechanism (BE-438F)
Apply grease to the portions indicated by the arrows during assembly.
1. Feed plate
2. Screws [2 pcs]
3. Button clamp holder
4. Button clamp holder shaft
5. Set screws [2 pcs]
6. Nuts [2 pcs]
Adjusting screw
Compression spring
After installing, check that the needle passes into the button hole without touching the button. (Refer to “11-13.
Adjusting the position of the button clamp (BE-438F)”.)
2888B
2889B