Filter
Top Products
5. EDITING PATTERN DATA
36
KE-430F, BE-438F
5-3. Switching to pattern editing mode
1
While pressing the TEST key, press the key.
・ The pattern number will flash in the PROGRAM No.
display.
・ The number of stitches remaining until the final stitch
will be displayed in the menu display.
・ The section number will be displayed in the section
No. display. “. ” means the start of a section.
・ The tension code will be displayed in the tension
display.
2
Press the or key to select the desired pattern
number.
*
Only the pattern numbers which are currently
registered will be displayed.
3
Depress the foot switch to the 2nd step.
・ Home position detection will be carried out.
・ The pattern number will changed to illuminated.
From this point on, the condition is referred to as pattern
editing mode.
5-4. Checking pattern data
You can check the tension information (section numbers and tension codes) in pattern data.
1
Carry out steps 1 to 3 in “5-3. Switching to pattern editing
mode” to switch to pattern editing mode.
When you press the
or key, the work clamp/button
clamp will move one stitch at a time.
・ The section number and tension code and the number
of stitches remaining until the final stitch are displayed
at the current position.
While holding down the SELECT key, press the
SECTION [+ -] key to automatically move the work
clamp/button clamp to the beginning of a section.
+: Moves in the forward direction
-:
Moves in the reverse direction
2
End pattern editing mode
TEST indicator switches off
Press the TEST key.
・ The display will return to the normal display and the
sewing machine will change to home position standby.
2628B
2nd step
4441Q
2404B
2626B 2627B
2629B 2630B