Filter
Top Products
4. FUNCTION SETTINGS
21
KE-430F, BE-438F
Maintenance settings (700 − 799)
No. Setting range
Initial
value
Setting units Setting details
750 ON/OFF OFF -
Continuous operation mode (for administrator)
ON: Continuous operation is repeated while the foot switch is
being depressed to the 2nd step (for a 2-pedal foot
switch, while the start switch is being depressed).
NOTE:
This setting is for use by an administrator in test
running mode. It is dangerous to set it to “ON” for
normal sewing, so it should always be set back to
“OFF” after use.
OFF: Disabled
751
0 − 3000
(ms)
200 10
Continuous operation cycle time adjustment timer (for
administrator)
* Enabled when No. 750 is set to “ON”.
752
0 − 99
0 1 Sewing machine ID code (for specifying SD card folder)
756 ON/OFF ON -
Thread winding speed limit
ON: Upper limit is limited to 2000 sti/min.
* If the speed specified at the operation panel exceeds
2000 sti/min, thread winding will be limited to 2000
sti/min.
OFF: Upper limit is not limited to 2000 sti/min.
* Thread winding is carried out at the speed specified at
the operation panel.
Specification and destination settings (800 − 899)
No. Setting range
Initial
value
Setting units Setting details
430F-03: 3, 5, K, F 3
430F-05: 3, 5, K, F 5
430F-0K: 3, 5, K, F K
430F-0F: 3, 5, K, F F
850
*1
438F-03: 3 3
-
Specification code setting
* The 438F has only -03 specifications.
3: -03 specifications (medium-weight material)
5: -05 specifications (heavy-weight material)
K: -0K specifications (knitted wear)
F: -0F specifications (foundation garments)
*1: This is not initialized during initialization mode.
Unique settings for each model (900 − 999)
No. Setting range
Initial
value
Setting units Setting details
951
OFF, 1 − 2
OFF 1
Eyelet bar tack closing device (old 432 series)
OFF: Disable
1: Eyelet bar tacker closing device operates after the work
clamp has dropped.
2: Eyelet bar tack closing device operates at the sewing start.