Filter
Top Products
4. FUNCTION SETTINGS
29
KE-430F, BE-438F
Item No. Item name Operation
[ 55]
[CL−r]
The valve for the right work clamp turns on. (*)
[ 56]
[CL−L]
The valve for the left work clamp turns on. (*)
[ 57] [Foot] The valve for the stepping foot turns on. (*)
[ 58] [FLiP] Inner clamping valve is turned ON (*)
[ 59] [CooL] Needle cooler valve is turned ON. (*)
[ 60] [7SEG]
Panel indicators illuminate in sequence, and then the 7-segment display turns on one
digit at a time.
Blank Æ 0 Æ 1 Æ 2 . . . . Æ 8 Æ 9 Æ 8. Æ Blank
[ 61] [ CUt]
Thread trimmer solenoid is turned ON for the specified period.
Remove the rear cover and check the operation.
[ 62] [dtEn] The digital tension solenoid is turned ON for the specified period.
[ 63] [ WiP] The external wiper solenoid is turned ON for the specified period. (*)
[ 64] [oP 1] Option output 1 turns on. (*)
[ 65] [oP 2] Option output 2 turns on. (*)
[ 66] [oP 3] Option output 3 turns on. (*)
[ 67] [oP 4] Option output 4 turns on.
[ 68] [oP 5] Option output 5 turns on.
[ 69] [oP 6] Option output 6 turns on.
[ 70] [oP 7] Option output 7 turns on.
[ 71] [oP 8] Option output 8 turns on.
[ 72] [oP 9] Option output 9 turns on.
[ 73] [oP10] Option output 10 turns on.
[ 74] [oP11] Option output 11 turns on.
[ 75] [oP17] Option output 17 turns on.
[ 76] [oP18] Option output 18 turns on.
[ 77] [oP19] Option output 19 turns on.
[ 78] [oP20] Option output 20 turns on.
* Cannot be used with the KE-430F and BE-438F.