Filter
Top Products
5. EDITING PATTERN DATA
34
KE-430F, BE-438F
5. EDITING PATTERN DATA
5-1. Tension information in pattern data
Tension codes are recorded in the pattern data to provide tension information.
The tension codes indicate the type of tension (T1 to T9).
In addition, the units which tension codes are divided into are called sections, and sequential numbers are assigned to them
starting from the first stitch. Up to a maximum of 99 sections are possible.
* The tension values for the tension codes are set in program mode for each program.
Example: Pattern No. 200
Section <1> Section <2> Section <3> Section <4>
Needle Drop No. <1> Needle Drop No. <2> Needle Drop No. <10> Needle Drop No. <28>
Tension Code <T1> Tension Code <T6> Tension Code <T4> Tension Code <T1>
Upper thread tension <75> Upper thread tension <125> Upper thread tension <110> Upper thread tension <75>
Example: When sewing program No. 900 into which pattern No. 200 has been programmed
Example: Editing in pattern editing mode
Pattern No. 200
Needle Drop No. Section No. Tension Code
1st stitch 1 T1
2nd stitch (to 9th stitch) 2 T6
10th stitch (to 27th stitch) 3 T4
28th stitch (to final stitch) 4 T1
Example: Program mode editing
Program No. 900
Pattern No. 200
X-scale 100
Y-scale 100
Sewing speed 2700
Slow start pattern Lo8
Upper thread tension T1 75
Upper thread tension T4 110
Upper thread tension T6 125
* Of all the tension codes (T1 to T9), only the
tension codes which have been programmed
into pattern No. 200 will be displayed.
1st stitch
2nd stitch
10th stitch
28th stitch
Final stitch
2623B
Tension Code
Final stitch
Section
No.
2624B